Key Takeaway — The average kitchen remodel in Maryland costs $55,000–$85,000 in 2026. Minor updates start around $25,000–$45,000, while major gut renovations with layout changes exceed $90,000–$150,000+. Pricing varies modestly by county — Montgomery and Howard County trend at or slightly above the state average, while outer Anne Arundel and Prince George’s communities trend a bit below. Five counties across GBC’s Maryland territory each run their own permit office, and cabinetry remains the single biggest line item everywhere at 25–35% of budget.
Maryland’s kitchen remodel market doesn’t move as one number. A “kitchen remodel cost in Maryland” search return that quotes a single flat figure is smoothing over real differences between a Bethesda estate, a Columbia village home, and a Glen Burnie rancher — differences in home value, labor market, and which county’s permit office you’re filing with. This guide gives the real 2026 numbers across GBC’s Maryland territory: pricing by tier, by size, by category, county by county and city by city, plus the cabinet, material, and labor numbers that actually drive your budget.
Kitchen Remodel Cost in Maryland at a Glance (2026)
Here’s the fast answer before we dig in. Most Maryland kitchen remodels land in one of three budget tiers, and — as in every DMV market — the single biggest factor is cabinetry, not square footage.
| Remodel Tier | Maryland Cost (2026) | Best For |
|---|---|---|
| Cosmetic Refresh | $25,000 – $45,000 | Dated kitchens that function well |
| Mid-Range Pull & Replace | $55,000 – $85,000 | Most full remodels (same layout) |
| Major Gut Renovation | $90,000 – $150,000+ | Layout changes, custom cabinetry, luxury |
Below, we break each of these down by county, by city, by size, and by category — with the cabinet, countertop, and labor numbers behind them.
Kitchen Remodel Cost by County
Maryland’s remodeling market splits along county lines almost as cleanly as it splits along permit-office lines — which is not a coincidence. Local labor markets, home values, and housing stock era track county boundaries closely across GBC’s territory.
Howard County (Columbia, Ellicott City, Clarksville, Fulton, Elkridge)
Howard County tracks the state’s mid-range band closely: $55,000–$85,000 for most full remodels. The county’s range is unusually wide by neighborhood — Columbia’s 1960s–90s village homes remodel at the state average, while Clarksville and River Hill’s larger, newer-money kitchens commonly run $75,000–$110,000 and estate-tier custom kitchens reach $100,000–$175,000+. Permits run through Howard County DILP. See the Columbia kitchen guide, Clarksville kitchen guide, Ellicott City kitchen guide, and North Laurel kitchen guide for neighborhood-level detail.
Anne Arundel County (Glen Burnie, Severn, Odenton, Gambrills, Crofton)
Anne Arundel trends a step below the Howard County average, at roughly $50,000–$80,000 for a mid-range remodel — reflecting the county’s mix of established rancher and split-level stock alongside newer planned communities near Fort Meade. Permits run through Anne Arundel County’s own Inspections & Permits office. See the Glen Burnie kitchen page for local specifics.
Montgomery County (Rockville, Bethesda, Gaithersburg, Silver Spring)
Montgomery County is Maryland’s most bifurcated market: Rockville and Gaithersburg’s mid-county stock remodels close to the state average ($55,000–$85,000), while Bethesda and Potomac’s larger, higher-value homes push into $90,000–$150,000+ territory routinely — pricing alongside Northern Virginia’s most affluent markets rather than the rest of Maryland. Permits run through Montgomery County DPS. The Rockville kitchen remodeling page covers this territory.
Prince George’s County (Bowie, Glenn Dale, South Laurel)
Prince George’s County trends similarly to Anne Arundel, around $50,000–$80,000 mid-range, with Bowie and Glenn Dale’s larger colonial-era homes supporting projects at the upper end of that band. Permits run through PG County’s DPIE (Department of Permitting, Inspections and Enforcement). See the Bowie kitchen page.
Baltimore County (Catonsville)
Catonsville and the Baltimore County edge of GBC’s territory run close to the Anne Arundel band, $50,000–$80,000 mid-range, with the county’s own permit and inspection office handling approvals. See the Catonsville kitchen page.
Kitchen Remodel Cost by Size: Small, Medium & Large
Kitchen size sets the floor for your budget, even though materials set the ceiling — true in Maryland exactly as it is across the DMV. A small kitchen finished with custom cabinetry and stone can still cost more than a large kitchen done with stock cabinets and laminate.
| Kitchen Size | Square Footage | Typical Maryland Cost (2026) |
|---|---|---|
| Small | Under 100 sq ft | $22,000 – $48,000 |
| Medium | 100 – 200 sq ft | $48,000 – $90,000 |
| Large | 200+ sq ft | $90,000 – $150,000+ |
Small kitchen remodel cost ($22,000–$48,000). Common in Ellicott City’s historic-district homes and Columbia’s older village townhomes, where compact original footprints keep cabinetry and counter area modest.
Medium kitchen remodel cost ($48,000–$90,000). The typical suburban Maryland kitchen — Rockville, Glen Burnie, Bowie, most of Columbia — with room for a modest island and a full appliance suite.
Large kitchen remodel cost ($90,000–$150,000+). Open-concept kitchens in River Hill, Clarksville, and Bethesda/Potomac, where bigger footprints and premium selections push toward the top of the range.
Cost Breakdown by Category
Six categories account for nearly all of a Maryland kitchen remodel’s cost, in roughly the same proportions across every county in GBC’s territory:
- Cabinetry — 25–35%. The single biggest line item, and the one with the widest price swing. See the cabinet lineup for a side-by-side of grades.
- Labor & Installation — 20–30%. Demolition, cabinetry and countertop installation, plumbing, electrical, tile, and finish carpentry.
- Appliances — 10–20%. A standard suite ($4,000–$8,000) versus professional ranges and built-in refrigeration ($15,000–$40,000+).
- Countertops — 10–15%. Laminate and entry quartz at the low end; quartzite, marble, and exotic granite at the high end. Our quartz-vs-granite guide walks through the trade-offs.
- Flooring — 5–10%. Luxury vinyl plank, tile, or hardwood, including subfloor prep.
- Plumbing & Electrical — 5–10%. New fixtures and circuits; relocating lines or opening a wall (common in Columbia’s older villages) adds significantly to this share.
How Much Do Kitchen Cabinets Cost in Maryland?
Because cabinetry is 25–35% of the budget, it’s the line item that most determines your total. Installed cabinet pricing across Maryland in 2026:
| Cabinet Type | Cost (per linear foot, installed) | Typical Kitchen Total |
|---|---|---|
| Stock | $100 – $300 | $5,000 – $12,000 |
| Semi-Custom | $150 – $650 | $12,000 – $25,000 |
| Full Custom | $500 – $1,200+ | $25,000 – $50,000+ |
Semi-custom is the sweet spot for most Maryland kitchens — sized and finished beyond stock options for a fraction of full-custom cost. Full custom shows up most often in Clarksville’s estate market and Bethesda/Potomac. GBC is an authorized dealer for Medallion, Forevermark, Waypoint, Fabuwood, and Design-Craft, spanning all three tiers.
Material Costs in Maryland (2026 Pricing)
Countertop material is the second-largest swing factor after cabinets. Installed countertop pricing across GBC’s Maryland territory in 2026:
| Material | Installed Cost (per sq ft) | Notes |
|---|---|---|
| Laminate | $20 – $40 | Most budget-friendly; modern patterns available |
| Quartz (engineered) | $60 – $115 | Most popular; durable, low-maintenance |
| Granite | $45 – $95 | Natural stone; periodic sealing |
| Quartzite | $85 – $175 | Premium natural stone, marble look — trending in Clarksville and Bethesda |
| Marble | $95 – $190+ | Luxury; higher maintenance |
| Butcher Block | $40 – $90 | Warm look; periodic oiling |
Beyond counters, budget for tile backsplash ($15–$40/sq ft installed), flooring ($6–$20/sq ft for LVP, tile, or hardwood), and a sink-and-faucet package ($400–$2,500).
Labor Rates in Maryland
Skilled-trade labor in Maryland runs close to Northern Virginia rates, with modest variation by county. Typical 2026 hourly rates across GBC’s territory:
| Trade | Hourly Rate (Maryland, 2026) |
|---|---|
| General Contractor / PM | $65 – $125 |
| Electrician | $80 – $145 |
| Plumber | $95 – $170 |
| Cabinet Installer | $65 – $115 |
| Tile Setter | $55 – $105 |
Because labor is 20–30% of a remodel, a single accountable team — rather than a chain of separately scheduled subcontractors — is one of the most reliable ways to keep labor cost and timeline under control across every county in this guide.
City-by-City Kitchen Remodel Costs in Maryland
Kitchen remodel pricing shifts noticeably even within a single Maryland county, driven by local labor demand, permitting offices, and home values.
Columbia, MD
Columbia mid-range remodels run $55,000–$85,000, tracking the state average closely thanks to the city’s mostly 1960s–90s village housing stock. See the Columbia kitchen guide and Columbia kitchen service page.
Ellicott City, MD
Ellicott City runs a similar $55,000–$88,000 mid-range band, with the historic district’s older housing occasionally adding design time for period-appropriate detailing. See the Ellicott City kitchen guide.
Clarksville & River Hill, MD
Howard County’s luxury pocket: mid-range remodels start at $55,000–$85,000, but River Hill full remodels commonly reach $75,000–$110,000 and estate-home custom kitchens run $100,000–$175,000+. See the Clarksville kitchen guide.
Fulton & Maple Lawn, MD
Fulton’s newer-construction stock supports $60,000–$95,000 mid-range projects, with Maple Lawn’s larger footprints at the upper end. See the Fulton kitchen service page.
Rockville & Gaithersburg, MD
Montgomery County’s mid-county market runs $55,000–$85,000, the same band as Howard County. See the Rockville kitchen remodeling page.
Bethesda & Potomac, MD
Among Maryland’s most affluent markets, Bethesda and Potomac remodels frequently start at the upper-mid range and climb into luxury territory — $85,000–$150,000+ — with custom cabinetry and premium stone the norm.
Glen Burnie, MD
Anne Arundel County’s largest community in GBC’s territory runs $50,000–$80,000 mid-range. See the Glen Burnie kitchen page.
Bowie, MD
Prince George’s County’s established colonial-era stock supports $50,000–$82,000 mid-range projects. See the Bowie kitchen page.
Catonsville, MD
Baltimore County’s edge of GBC’s territory runs $50,000–$80,000 mid-range. See the Catonsville kitchen page.
How Long Does a Kitchen Remodel Take in Maryland?
A typical Maryland kitchen remodel takes 6–12 weeks on site, plus 3–6 weeks of design and material lead time before demolition begins:
- Design & selections — 2–4 weeks. Layout, cabinetry, counters, and finishes finalized.
- Ordering & lead time — 3–6 weeks. Cabinets and stone are the longest-lead items.
- Demolition — 2–4 days.
- Rough-in (plumbing, electrical, framing) — 1–2 weeks, with county inspections.
- Cabinet & countertop installation — 1–2 weeks (counters are templated after cabinets set).
- Tile, flooring, finish carpentry, paint — 1–2 weeks.
- Final fixtures, appliances & walkthrough — a few days.
Cosmetic refreshes can wrap in 3–4 weeks; full gut renovations with permits, wall removals, and custom cabinetry can run 12–16 weeks — the wall-removal scenario is more common in Maryland’s older village stock (Columbia, Ellicott City) than in Northern Virginia’s newer builder communities.
Permits & Regulations Across Maryland’s Five Counties
Most full kitchen remodels in Maryland require a permit — but which office you file with depends entirely on which county you’re in, and GBC’s territory spans five separate ones:
| County | Permit Office | Cities Covered |
|---|---|---|
| Howard County | DILP (Dept. of Inspections, Licenses & Permits) | Columbia, Ellicott City, Clarksville, Fulton, Elkridge |
| Montgomery County | DPS (Dept. of Permitting Services) | Rockville, Bethesda, Gaithersburg, Silver Spring |
| Anne Arundel County | County Inspections & Permits | Glen Burnie, Severn, Odenton, Gambrills, Crofton |
| Prince George’s County | DPIE (Dept. of Permitting, Inspections & Enforcement) | Bowie, Glenn Dale, South Laurel |
| Baltimore County | County Permits & Inspections | Catonsville |
Any change to electrical, plumbing, gas, or structure triggers permitting in every one of these counties. Cosmetic work (refacing, countertops, paint) usually does not. A remodeler who works across county lines every week — rather than one that only knows its home jurisdiction — is the practical difference between a permit that’s an invisible part of the schedule and one that stalls it. GBC pulls the correct county’s permit and schedules the inspections as part of every project.
Hidden Costs Most Maryland Homeowners Miss
The surprises that blow budgets are almost always behind the walls, and Maryland’s older village stock (1960s–80s Columbia, Ellicott City, established Anne Arundel and PG neighborhoods) hides more of them than newer construction:
- Permit and inspection fees (a few hundred to a couple thousand dollars, varying by county)
- Bringing old electrical or plumbing up to current code
- Wall-removal structural work in older, closed-plan kitchens
- Temporary kitchen setup while yours is out of service
- Disposal and dumpster fees
- Appliance delivery, hookup, and old-unit removal
A 15–20% contingency fund is the standard protection against these, and it matters more in a 1970s Columbia village kitchen than in a 2015 Fulton build.
How to Budget for Your Maryland Kitchen Remodel
A reliable rule of thumb is to budget 5–15% of your home’s value for a kitchen remodel, then add a 15–20% contingency for surprises uncovered during demolition. For a $550,000 Maryland home, that points to a $27,500–$82,500 kitchen budget before contingency — with Bethesda, Potomac, and Clarksville homeowners typically budgeting toward the higher end given local home values.
To estimate your own project: start with your tier (refresh, mid-range, or gut), adjust for kitchen size, then layer in cabinet grade (the biggest variable) and countertop material. Add 15–20% for contingency, more if your home predates 1990. A free in-showroom consultation converts that estimate into a fixed-scope number.
How to Save Money on Your Maryland Kitchen Remodel
- Keep the existing layout when possible. Moving plumbing, gas, or a load-bearing wall is the costliest change you can make — though in Columbia’s closed-plan 1960s–70s kitchens, opening a wall is often worth the cost for the daily livability gain.
- Choose semi-custom over full-custom cabinets. You get most of the look for a fraction of the cost.
- Reface instead of replace when cabinet boxes are still solid — common and cost-effective in 1980s Howard County stock.
- Mix materials. Splurge on a quartz or quartzite island, use a more affordable counter on perimeter runs.
- Plan thoroughly before demolition. Mid-project changes are the most expensive kind, in every county.
- Get a fixed-scope estimate from one accountable team to avoid change-order creep.
Kitchen Remodel ROI in Maryland
A kitchen remodel is one of the strongest resale investments in Maryland. According to industry Cost vs. Value data, a mid-range kitchen remodel in the South Atlantic region typically returns 70–80% of its cost at resale, and an updated kitchen is consistently one of the top drivers of buyer interest across GBC’s Maryland territory. In counties like Howard and Anne Arundel, where entire subdivisions share a construction era and, often, a nearly identical original kitchen, an updated one is a genuine differentiator against comparable listings — not just a nice-to-have.
Why Choose GBC Kitchen & Bath for Your Maryland Kitchen Remodel
GBC Kitchen & Bath is a design-build remodeler serving Maryland, Northern Virginia, and Washington DC since 2001, with showrooms in Columbia and Rockville and all in-house installers — no subcontractors. Because the team that designs your kitchen is the team that builds it, projects stay on schedule and on budget across every county in this guide.
- All in-house installers — no subcontractors: consistent quality and a single point of accountability.
- 3-year workmanship warranty on every kitchen, bathroom, and basement project.
- Two Maryland showrooms — Columbia (5.0★, 74 reviews) and Rockville (4.9★, 209 reviews) — plus two more across the DMV.
- Free in-showroom design consultation to scope your project and lock a realistic, fixed-scope budget.
- Award-recognized: Houzz Best of Service 2023, 2024, 2025; Angi Super Service Award 2023, 2024, 2025; NARI-accredited.
- Five-county permit fluency — Howard, Montgomery, Anne Arundel, Prince George’s, and Baltimore County, all handled in-house.
Frequently Asked Questions
How much does a kitchen remodel cost in Maryland?
A mid-range kitchen remodel in Maryland costs $55,000–$85,000 in 2026. Cosmetic refreshes start around $25,000–$45,000, and major gut renovations run $90,000–$150,000+. Montgomery and Howard County trend at or slightly above the state average; outer Anne Arundel and Prince George’s communities trend a bit below.
What is the average cost of a kitchen remodel in Howard County, MD?
In Howard County — Columbia, Ellicott City, Clarksville, Fulton — a mid-range kitchen remodel runs $55,000–$85,000, with Clarksville and River Hill’s larger kitchens commonly reaching $75,000–$110,000+. Permits run through Howard County DILP.
Is a kitchen remodel cheaper in Maryland than Northern Virginia?
Slightly, in most cases. Maryland’s mid-range tier runs the same broad $55,000–$85,000 band, but Montgomery and Howard County labor trends a few percentage points below Fairfax and Arlington. Bethesda and Potomac price alongside NoVA’s most affluent markets.
What is the most expensive part of a kitchen remodel?
Cabinetry, at 25–35% of the total budget. Labor and installation (20–30%) and countertops (10–15%) follow. Custom cabinetry, natural stone, and moving walls or plumbing are the fastest ways costs climb.
How much do kitchen cabinets cost in Maryland?
Stock: $100–$300/linear ft. Semi-custom: $150–$650. Full custom: $500–$1,200+. Most Maryland kitchens total $15,000–$40,000 in cabinetry.
How long does a kitchen remodel take in Maryland?
6–12 weeks on site plus 3–6 weeks of design and lead time. Cosmetic refreshes finish in 3–4 weeks; full gut renovations run 12–16 weeks.
Do I need a permit for kitchen remodeling in Maryland?
Yes — for electrical, plumbing, gas, or structural changes, which covers most full remodels. Each county runs its own office: Howard DILP, Montgomery DPS, Anne Arundel, Prince George’s DPIE, and Baltimore County each handle their own permits and inspections.
Who does kitchen remodeling in Maryland?
GBC Kitchen & Bath — Columbia showroom (5.0★, 74 reviews) and Rockville showroom (4.9★, 209 reviews). Since 2001, in-house installers only, 3-year workmanship warranty. (410) 417-6060 (Columbia) or (301) 309-3520 (Rockville).
Get a Free Kitchen Remodel Estimate in Maryland
Ready for a real number on your kitchen? Book a free design consultation at GBC Kitchen & Bath’s Columbia or Rockville showroom. You’ll see materials in person, plan your layout with an in-house designer, and leave with a transparent, fixed-scope estimate — backed by our 3-year workmanship warranty. Ask about financing options to spread the cost of your remodel.
